View source for Configure your microphone/en

== Minimize background noises ==
* Minimize noise sources around you - close windows, go to a quiet room, turn off any other devices that might include a fan.
* Try different microphones - your computer's built in microphone, headphones or even your phone's microphone.
* If you are using a computer and you encounter white noise on your recordings, use a headset. Even a simple pair of headphones with mic will significantly reduce parasites. 
* If you are already using a headset on your computer and encounter white noise, go to the sound parameters of your computer and lower the level of your microphone.
Side Note : make sure that the chosen microphone is the headset one. To do so, go to sound parameters, sound entry, and click "analogic" or "headset".

== Basics to check ==
Always check the following elements before starting any recording session on Lingua Libre :
* Your microphone is switched on and plugged in to your computer (if you use an external microphone)
* Your browser has access to your microphone
* You did allow lingualibre.org to access your microphone via your browser
* Your operating system's audio settings are correct
 
== Open the sound parameters on your computer ==
Make sure the microphone you want to use is the one selected in your audio settings

=== Windows ===
Go to Settings > System > Sound
Check that the correct option is selected in the "input" section. You can also briefly test the microphone with the tester offered on Windows 10.
You can try clicking on the "repair" button in case the microphone does not seem to be working, or select "manage audio devices".
 
=== Linux - ubuntu ===
Click on the microphone icon in the upper right corner of your screen - next to battery information and time. You may play on the volume of your microphone from this small console. To get more options, click on the "sound parameters" bar at the bottom of the window. It will open a new window comprising 4 tabs : out / in / soud effects / applications. The only tabs you need to go through while setting up your computer for lingua libre contribution are the first two : in / out.